Kulzer Technovit® 4002
Technovit® 4002 cold embedding resin for embedding metalographic samples. Colour: white or graphite-grey.
Material properties
Technovit® 4002 embedding resin is based on modified polyester and consists of a powder and a liquid component. This two-component polymer has been specifically developed for embedding metalographic samples without any shrinkage or leaving gaps. Technovit® 4002 embedding resin can be applied across the entire range of available materials with varied geometric shapes, whose margin fits and grinding and polishing properties must be of the best quality available. A special powder component, which does not release any toxic dust, has been developed for Technovit® 4002 embedding resin.
Application
Technovit® 4002 embedding resin can be processed for approx. 4 minutes. Curing time is between 10 and 15 minutes depending on the sample size and the ambient temperature. As it does not shrink and fits excellently around margins, Technovit® 4002 embedding resin achieves perfectly sharp edges. Technovit® 4002 embedding resin is mixed by weight in a ratio of 2:1, resp. by volume in a ratio of 3:1 powder and liquid. The mixing ratios can be slightly changed to suit special requirements.
Special properties
- Gapless margins
- No shrinkage during polymerisation
- Excellently edge definition
- Optimum grinding and polishing properties
- No threat to health – no silica flour
- Easy to handle
- Inking with commercial coloured pigments is possible
Technovit® 4002 delivery units
-
Designation
- Technovit® 4002 powder, white
- Technovit® 4002 powder, white
- Technovit® 4002 powder, white
- Technovit® 4002 powder, graphite
- Technovit® 4002 powder, graphite
- Technovit® 4000/4002 1-C-liquid
- Technovit® 4000/4002 1-C-liquid
- Technovit® 4000/4002 1-C-liquid
-
Quantity
- 1 x 1000 g
- 1 x 2000 g
- 1 x 10 g
- 1 x 1000 g
- 1 x 10 g
- 1 x 500 mL
- x 1000 mL
- 1 x 5000 mL
-
Cat.No.
- 66009368
- 66009369
- 66009370
- 66040393
- 66040394
- 66009371
- 66009372
- 66009373